Description BlueSolar Charge Controller 100/15 Battery voltage 12/24V Auto Select Rated charge current 15A Nominal PV power, 12V 1a,b) 220W Nominal PV power, 24V 1a,b) 440W Max. PV short circuit current 2) 15A Automatic load disconnect Yes, maximum load 15A Maximum PV open circuit voltage 100V Peak efficiency 98% Self-consumption 12V: 20 mA 24V: 10 mA Charge voltage ‘absorption’ 14,4V / 28,8V (adjustable) Charge voltage ‘float’ 13,8V / 27,6V (adjustable) Charge algorithm multi-stage adaptive Temperature compensation -16 mV / °C resp. -32 mV / °C Continuous/peak load current 15A / 50A Low voltage load disconnect 11,1V / 22,2V or 11,8V / 23,6V or Battery Life algorithm Low voltage load reconnect 13,1V / 26,2V or 14V / 28V or Battery Life algorithm Protection Battery reverse polarity (fuse) Output short circuit / Over temperature Operating temperature -30 to 60°C (full rated output up to 40°C) Humidity 95%, non-condensing Data communication port VE.Direct See the data communication white paper on our website ENCLOSURE Colour Blue (RAL 5012) Power terminals 6 mm² / AWG10 Protection category IP43 (electronic components), IP22 (connection area) Weight 0,5 kg Dimensions (h x w x d) 100 x 113 x 40 mm STANDARDS Safety EN/IEC 62109-1, UL 1741, CSA C22.2 1a) If more PV power is connected, the controller will limit input power. 1b) PV voltage must exceed Vbat 5V for the controller to start. Thereafter minimum PV voltage is Vbat 1V 2) A PV array with a higher short circuit current may damage the controller.
