Description Transfer switch 16A INVERTER Input voltage range 19 – 33V ‘Heavy duty’ output AC 16 A Output AC1, 2, 3 Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1) Cont. output power at 25°C (3) 1600VA / 1300W Cont. output power at 40°C 1200W Peak power 3000W Maximum efficiency 94% Zero load power 10W Zero load power in search mode 3W CHARGER AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 Charge voltage ‘absorption’ 28,8V Charge voltage ‘float’ 27,6V Storage mode 26,4V Charge current house battery (4) 40A Charge current starter battery (A) 4 Battery temperature sensor yes Programmable relay (5) yes Protection (2) a – g Solar Charge Controller Model MPPT 100/50 Maximum output current 50 A Maximum PV power, 6a,b) 1400W Maximum PV open circuit voltage 100V Maximum efficiency 98% Self-consumption 10 mA Charge voltage ‘absorption’, default setting 28,8V Charge voltage ‘float’, default setting 27,6V Charge algorithm multi-stage adaptive Temperature compensation -32 mV / °C Protection a – g COMMON CHARACTERISTICS Operating temp. range -20 to 50°C (fan assisted cooling) Humidity (non-condensing): max 95% ENCLOSURE Material & Colour aluminium (blue RAL 5012) Protection category IP 21 Battery-connection Battery cables of 1.5 meter PV connection Three sets of MC4 (PV-ST01) PV connectors. 230 V AC-connection G-ST18i connector Weight 15kg Dimensions (hxwxd) 745 x 214 x 110mm STANDARDS Safety EN 60335-1, EN 60335-2-29, EN 62109 Emission / Immunity EN 55014-1, EN 55014-2, EN 61000-3-3 Automotive Directive 2004/104/EC 1) Can be adjusted to 60Hz and to 240V 2) Protection a. Output short circuit b. Overload c. Battery voltage too high d. Battery voltage too low e. Temperature too high f. 230 VAC on inverter output g. Input voltage ripple too high 3) Non-linear load, crest factor 3:1 4) At 25°C ambient 5) Programmable relay which can be set for general alarm, DC under voltage or genset start signal function 6a) If more PV power is connected, the controller will limit input power to 700 W resp. 1400 W 6b) PV voltage must exceed Vbat 5V for the controller to start. Thereafter minimum PV voltage is Vbat 1V
